acrylic_citrus_300x220 acrylic_learners_300x220 acrylic_scooters_300x220
Custom Laser Cut Acrylic Letters & Logos
Outdoor & Indoor Use

Laser cut acrylic can accurately reproduce your custom lettering, logos and intricate designs for a lasting impression.

  • 7 Acrylic thicknesses - 1/8", 3/16", 1/4", 3/8", 1/2", 3/4", 1"
  • 32 Standard pigmented letter colors (1/8", 3/16", 1/4", 3/8" & 1/2") and 45 painted colors (3/4" & 1")
  • Custom color matching available.
  • Superior laser cut polished edges.
  • UV stable, suitable for use indoors and outdoors.
  • Low-Cost option with high impact results.
  • Lifetime Guarantee.
Contact Us For A Quote On Your Project
Laser Cut Custom Acrylic Lifetime Guarantee
1/8in Flat Cut Acrylic
3/16in Flat Cut Acrylic
1/4in Flat Cut Acrylic
3/8in Flat Cut Acrylic
1/2in Flat Cut Acrylic
3/4in Flat Cut Acrylic
1in Flat Cut Acrylic
Standard Pigmented Acrylic Colors Standard Pigmented Acrylic Colors Standard Painted Acrylic Colors Standard Painted Acrylic Colors

Laser Cut Acrylic Letters Standard Mountings

Plain Mount Stud Mount Pad Mount
1a - Plain 2a - Stud 2b - Pad
Plain letters are shipped without any mounting hardware. Studs are metal threaded posts on the rear of the letters.  Specify if studs need to be in line for brick or block wall mortar joints.  When installed, studs typically extend approx. 1-1/2"-2" from the back of the letters. (Brick: 2-5/8" on center; Block: 8" on center) Pads are plastic disks on the rear of the letters.  Adjustable or flush pads available upon request.
     
Combination Mount Combination All Mount Double Sided Tape Mount
2c - Combination 2d - Combination All Double Sided Tape
Combination has pads at the bottom and studs through pads at the top of the letter. Specify if studs need to be in line for brick or block wall mortar joints. Not for letters under 6".
Combination All has studs through pads on all mounts.  Specify if studs need to be in line for brick or block wall mortar joints. Not for letters under 6".
Strips of 3M-VHB tape are placed strategically on the back of the letter. Follow 3M recommendations for use. Not suitable for all mounting surfaces.
     
Flush Stud Mounting Gemini Recommends Combination Mount
Flush-Stud
Letters/logos 3/8" and thicker can be drilled and tapped to receive studs. Studs are metal threaded posts on the rear of the letters.  Specify if studs need to be in line for brick or block wall mortar joints.  When installed, studs typically extend approx. 1-1/2"-2" from the back of the letters.  (Brick: 2-5/8" on center; Block: 8" on center)

What we offer

Installation Guides & Videos

In this section you will find helpful installation guides and videos with instructions on how to install each type of letter or plaque.

img

FAQ

Find answers to your questions in our frequently asked questions section. Answers to questions about our Guarantee, Return Policy, Art Charges, Production Time and more...

img

What's New

Gold Leaf Finish

Gold Leaf Finish Plastic LettersPure 24K gold is applied to any Gemini Formed Plastic or Injection Molded Minnesota Letters. The finish result is not matched by any paint, treatment, or other base metal. Gold Leaf is truly the gold standard of the industry. Completely weather able, installations last a generation before re-leafing is required due to  environmental wear and tear in most applications. Round and prismatic styles are recommended for best results. Contact us for a quote on this process.
Customer Service:  800.804.4716  M-F  9am-5pm CST
Accepted Payment Methods